Finding a good beard trimmer sounds easy until you actually start using one. One trimmer pulls hair. Another gets hot. A third has guards that never seem to give you the length you want.
The Brio Beardscape V2 takes a different approach. Instead of focusing only on raw cutting power, it gives you more control over the trim.
You can change the motor speed. You can fine-tune the blade. You can use different guards for longer beards. There is even a digital display that tells you what is happening.
But does all that make it a better beard trimmer?
That is the real question.
In this Brio Beardscape V2 review, we will look at its ceramic blade, battery life, motor, trimming range, comfort, fades, stubble, sensitive skin performance, maintenance, and overall value.
Disclosure: This post contains affiliate links. If you purchase through these links, I may earn a small commission at no extra cost to you.
Table of Contents
Brio Beardscape V2 TL;DR
If you want the short version, here is where the Beardscape V2 makes the most sense.
It is a control-focused trimmer rather than a simple one-button beard groomer.
- Best Overall: Brio Beardscape V2 for men who want precise beard length control.
- Best for Stubble: The adjustable 1.0 to 1.9 mm blade is useful when small changes make a visible difference.
- Best for Long Beards: The included reversible guards extend trimming to longer beard lengths.
- Best for Sensitive Skin: The ceramic blade and adjustable clearance can be useful if aggressive blades cause irritation.
- Best for Fading: The adjustable blade gap gives you more control when blending short beard areas.
- Best for Battery Life: Brio rates the Beardscape V2 for up to four hours of runtime, depending on motor speed.
- Best for Travel: The V2 adds a travel lock and has an updated display.
- Skip It If: You mainly want an ultra-close zero-gap lineup from the standard blade or a fully waterproof trimmer.
The big idea is simple. The Beardscape V2 gives you more ways to control the cut. That is its biggest strength, but it also means you pay for features you may not need.
Brio Beardscape V2 Cordless Beard Trimmer for Men with Ceramic Blade, Black
Brio Beardscape V2 Comparison Table
The table below gives you the important details before we get into the deeper review.
Think of it as the quick look you would want before spending your money.
| Product | Best For | Key Features | Pros | Cons | Recommendation |
|---|---|---|---|---|---|
| Brio Beardscape V2 | Beard control and versatility | Ceramic blade, 5 speeds, LCD display, adjustable blade, reversible guards | Long runtime, precise length control, comfortable trimming | Not waterproof, standard blade starts around 1 mm, guards can feel bulky | Recommended for serious home groomers |
| Brio Beardscape V1 | Lower-cost Beardscape option | Ceramic blade, 5 speeds, adjustable blade, LCD display | Similar core trimming system, long battery life | No V2 travel lock, older display and grip | Good if priced well below V2 |
| Brio Beardscape V2 + Zero Blade | Very short trims and sharper lines | V2 platform plus 0.2 mm zero blade | Closer cutting, better for tight lines | Extra blade costs more | Best if standard blade is not close enough |
The V1 and V2 share much of the same core hardware. Brio’s own comparison says both use the same 2,200 mAh battery, five motor speeds, ceramic blade system, guards, and basic blade adjustment. The V2’s main changes are the grip, travel lock, and updated display.
Brio Beardscape V2 Expert Opinion and Methodology
A good trimmer review should answer a simple question: what kind of man should actually buy this thing?
That matters more than counting buttons or repeating the manufacturer’s marketing copy.
For this review, the Beardscape V2 is judged across the areas that matter during normal grooming.
The first area is cutting control. A beard trimmer should make it easy to repeat the same length every time. The V2’s adjustable blade and reversible guards are important here.
The second is cutting performance. Beard hair is not the same everywhere. Your cheeks may have soft hair while your chin has thick, wiry growth. A useful trimmer should handle both without forcing you to use maximum power all the time.
Then there is comfort. This includes grip, blade design, vibration, heat, and how easy the trimmer is to move around the jaw and neck.
Battery life is also important. A long runtime is nice, but a battery indicator is arguably just as useful. You do not want the trimmer dying halfway through one side of your beard.
Maintenance matters too. A premium trimmer should not become a headache after six months.
Finally, there is value. A $100-plus trimmer does not automatically become better because it has more features. Those features need to solve real grooming problems.
One important limitation should be clear. This is not a personal hands-on test report. The analysis combines manufacturer specifications, the user manual, and published independent reviews. Where Brio makes a performance claim, it is treated as a manufacturer claim unless independent testing supports it.
Brio Beardscape V2 Review
The Beardscape V2 is an unusual beard trimmer because it behaves a little like a small clipper.
It gives you control over the blade and motor instead of making every decision for you.
The Beardscape V2 is a premium beard and body trimmer for men who want more control over their grooming routine. Its main strengths are the ceramic blade, adjustable cutting length, variable motor speed, long battery life, and useful digital display.
The main weakness is just as important. The standard blade is not designed for an ultra-close, zero-gap finish.
Quick Verdict: The Brio Beardscape V2 is a strong premium beard and body trimmer for men who value control, long battery life, adjustable cutting, and comfortable grooming. Its biggest weakness is that the standard ceramic blade is not designed for the closest possible outline.
Best For: It is best for medium and longer beards, stubble, beard blending, home hair trimming, and users who want one grooming tool for several jobs.
Key Specs: The V2 uses a ceramic blade with adjustable cutting clearance, five motor-speed settings from 5,000 to 7,000 RPM, a lithium-ion battery, a digital display, USB-C charging, a charging dock, a travel lock, and reversible guide guards. Published specifications list up to 240 minutes of runtime, although actual runtime depends on the selected motor speed.
Brio Beardscape V2 Ceramic Blade
The ceramic blade is one of the biggest reasons to consider the Beardscape V2.
It changes how the trimmer feels compared with a traditional metal-blade design.
Brio says the ceramic blade creates less friction and heat than stainless steel. The company also describes the ceramic blade as much harder than stainless steel. Those are manufacturer claims, so they should not be confused with an independent laboratory durability test.
What matters to you is the practical result.
A blade that produces less friction can feel smoother during repeated passes. That can be helpful around areas such as the neck, jawline, and under the chin.
The Beardscape V2 also lets you adjust the blade from about 1.0 to 1.9 mm. Published reviews commonly list four positions at 1.0, 1.3, 1.6, and 1.9 mm.
That may sound like a tiny difference.
It is not.
Imagine painting a wall with a thick brush. A small change in the brush pressure can change the final look. Beard length works in a similar way. Moving from a very short stubble length to a slightly longer one can make a patchy beard look fuller.
The important catch is that the standard blade does not give you a true skin-close trim. If you want around 0.2 mm, Brio sells a separate Zero Blade designed for much shorter cutting.
Brio Beardscape V2 Motor and RPM
The Beardscape V2 gives you five motor-speed settings.
That is useful when you want to choose between control and cutting speed.
The available settings run from 5,000 to 7,000 RPM. Independent reviews report the same range and describe the adjustable motor as one of the V2’s more distinctive features.
Why would you want five speeds?
Think about driving a car through a parking lot compared with driving on a highway. You do not always need maximum power.
For dense beard hair, a higher setting can help the trimmer move through the hair more efficiently. For detail work, a lower setting can give you a little more control.
This is particularly useful if your beard has different textures.
For example, your chin may be dense while the cheeks are lighter. You can use more power where the hair is thick and reduce it when working around finer areas.
There is another benefit: motor speed affects battery life. Published information based on the manual lists estimated runtime from 240 minutes at 5,000 RPM down to 180 minutes at 7,000 RPM.
That makes the speed control more than a gimmick.
Brio Beardscape V2 Battery Life
Battery life is one of the strongest parts of the Beardscape V2.
You can go a long time between charges, especially if you do not constantly use the highest motor setting.
Brio and the user manual list a 2,200 mAh lithium-ion battery. Published specifications put maximum runtime at about four hours.
For most people, that is more than enough.
Suppose you spend 10 minutes trimming your beard twice a week. Even at 20 minutes per week, four hours of theoretical runtime represents a lot of grooming sessions.
The actual number will be lower or higher depending on how you use it. Motor speed, hair density, and trimming technique all matter.
The digital display is also useful here.
Instead of staring at a tiny battery light and guessing, the V2 gives you more information about remaining battery life. The updated display also shows motor speed and blade settings.
That sounds like a small thing until you have an important event in the morning and realize your trimmer has almost no power.
The V2 also supports USB-C charging and comes with a charging dock.
Brio Beardscape V2 Ergonomics and Grip
A trimmer can have excellent blades and still be annoying to use.
If it is awkward to hold, you will notice that every time you trim your beard.
The V2 weighs about 8.1 ounces according to published specifications and reviews.
That is not ultra-light.
For some users, the extra weight can make the trimmer feel stable. For others, especially during long grooming sessions, it may feel slightly bulky.
Brio improved the side grip panels compared with the V1. The company specifically lists improved grip elements as one of the V2’s changes.
This is a sensible upgrade.
Your hand naturally changes position as you move from your cheek to your neck. A secure grip helps you keep the blade at the same angle.
The design is also quite futuristic.
Some men will love that. Others may prefer a simpler trimmer that looks more like a traditional barber tool.
That is personal preference, but the bigger point is function. The V2’s shape is designed to give you control rather than simply look expensive on a bathroom counter.
Brio Beardscape V2 for Fades
The Beardscape V2 is particularly interesting if you like fading your beard into your sideburns or haircut.
Its adjustable blade gives you more control over the transition between lengths.
A fade is basically a smooth change from short hair to longer hair.
Imagine painting a gradient from dark to light. You do not jump from one extreme to the other. You make small changes.
The V2’s adjustable blade can help with those small changes. You can combine the blade setting with different guards to create a gradual transition.
That does not mean the Beardscape V2 replaces a professional hair clipper for every fade. A dedicated clipper can offer different blade systems, lever travel, guards, and cutting power.
But for beard fades and home grooming, the V2 has a useful setup.
It is especially practical when you want to blend a beard into short sideburns without changing between several tools.
Brio Beardscape V2 for Stubble
Stubble is where the Beardscape V2’s fine adjustment system makes the most sense.
A small length change can completely alter how your face looks.
The standard blade adjusts through short cutting positions around 1.0 to 1.9 mm. The included guards then let you move into longer beard lengths.
Why does this matter?
Maybe 1 mm makes your beard look too dark and harsh. Move slightly longer and the beard may look softer.
Or perhaps 1.6 mm looks too short, while 1.9 mm gives you exactly the amount of shadow you want.
That is where the Beardscape V2 is different from a basic trimmer with one fixed head.
Brio also publishes guidance on dialing in a stubble length. Its advice is to start longer and gradually move shorter until you find the length that works for your hair and face.
That is good advice for beginners too.
If you are trimming your beard for the first time, do not start too short. You can always remove more hair. You cannot put it back.
Brio Beardscape V2 for Sensitive Skin
Sensitive skin changes the buying decision.
The most powerful trimmer in the world is not useful if it leaves your neck red and irritated.
The V2’s ceramic blade and adjustable clearance are part of its appeal here. Brio specifically positions the adjustable blade as useful for giving more clearance in sensitive areas.
That does not mean the trimmer is guaranteed to prevent irritation.
Skin reacts differently from person to person.
Technique matters too. Pressing the trimmer hard against your neck is rarely a good idea. Let the blade do the work.
If you are prone to irritation, start with a slightly longer setting. Use light pressure. Move slowly over difficult areas.
The standard blade’s 1 mm minimum can also be an advantage if you find extremely close blades irritating.
But there is a trade-off.
If you want a very sharp, skin-close neckline, the standard ceramic blade may not be enough. Brio’s optional Zero Blade is designed for approximately 0.2 mm cutting and is intended for tighter lines and shorter results.
Brio Beardscape V2 for Thick Hair
Thick beard hair is a good test for any trimmer.
A weak motor can slow you down, while a poor blade can cause pulling and repeated passes.
The Beardscape V2 gives you five motor speeds up to 7,000 RPM. Published independent reviews report good performance on coarse facial hair, although those experiences should be treated as individual testing rather than a guarantee for every beard.
The adjustable motor is useful here.
Start at a moderate setting. If the trimmer moves through your beard easily, there is no reason to use maximum power.
If you have very dense hair, increase the speed.
The wide ceramic blade is also useful for removing beard length efficiently. You are not trying to use the tip of a tiny detail trimmer to clear a full beard.
Still, there is a difference between a beard trimmer and a professional clipper.
If you regularly cut very thick head hair or large amounts of bulk hair, a dedicated clipper may be a better tool.
For normal beard maintenance, however, the V2 has plenty of control.
Brio Beardscape V2 for Long Beard
The Beardscape V2 is useful for maintaining a longer beard because its guards cover more than short stubble.
That makes it more practical for men who do not want a close beard every morning.
The included reversible guards extend the trimming range to longer lengths, with published specifications reaching roughly 18 mm.
That gives you several options.
A shorter guard can clean up a short beard. A longer guard can help maintain a fuller beard without taking off too much hair.
The reversible design is also practical because one guard gives you two lengths.
There is one complaint worth mentioning.
An independent review found the guards somewhat bulky and less impressive for precision work.
That makes sense.
Guards are great when you want an even length across a larger area. They are less useful when you are trying to sculpt a tiny section around your mustache or neckline.
For those jobs, the bare blade is easier to control.
Brio Beardscape V2 Noise and Heat
Nobody wants a trimmer that sounds like a lawn mower beside their face.
The Beardscape V2 is designed around a ceramic cutting system that Brio says creates less friction, heat, and noise than metal blades.
Brio describes the Beardscape line as quiet, while independent reviews also report relatively quiet operation.
That makes the V2 more pleasant for regular grooming.
Noise is easy to ignore when you test a trimmer for five minutes. It becomes more important when you use it every few days.
Heat matters for the same reason.
If the blade gets hot during a long trim, your skin is going to notice. The ceramic design is intended to reduce friction and heat, although real-world heat will still depend on motor speed, trimming time, hair density, and maintenance.
For most beard grooming sessions, the V2’s design should be comfortable enough.
Brio Beardscape V2 Body Grooming
The Beardscape V2 is not limited to facial hair.
Brio positions it as a beard, hair, and body trimmer, with optional blades designed for different uses.
The standard ceramic blade can be used for beard, stubble, and hair trimming. Brio also sells a dedicated Body Blade with a body-friendly rake design for sensitive areas.
That distinction is important.
You should not assume that every blade attachment is equally suitable for every part of the body.
If you plan to use the Beardscape below the neck, consider the appropriate blade and length rather than simply using the shortest setting everywhere.
The V2 can therefore serve as a multi-purpose grooming device, but you may need additional accessories to get the best experience for specific jobs.
That increases the total cost.
Brio Beardscape V2 Wet and Dry Use
One major limitation is simple: the Beardscape V2 is not waterproof.
That matters if your ideal grooming routine happens in the shower.
The user manual warns against water use, and independent specifications also list the V2 as not waterproof.
So this is a dry-grooming trimmer.
That is not necessarily bad.
Many men prefer trimming a dry beard because they can see the hair length more clearly. But cleaning requires more care because you cannot simply run the whole device under a tap.
Brio recommends brushing hair away rather than using water to clean the trimmer.
If you want a waterproof beard trimmer that can live in the shower, the Beardscape V2 is not the obvious choice.
If you normally trim at the bathroom mirror before showering, this limitation may not bother you at all.
Brio Beardscape V2 Digital Display
The display is one of those features that sounds unnecessary until you use it.
Then you realize how useful it is to know exactly what the trimmer is doing.
The V2’s updated display shows information such as battery status, motor speed, blade setting, and travel-lock status.
That is more information than most simple beard trimmers provide.
For example, if you are trying to repeat the same 1.6 mm stubble length every few days, you can check the setting rather than guessing.
The motor display is useful too.
You can experiment with different speeds and find what works for your beard.
The display also gives the V2 a more technical feel.
Some people will love that.
Others may look at it and think, “I just want to trim my beard.”
Both reactions are fair.
The important question is whether the information helps you. For people who like repeatable grooming, it does.
Brio Beardscape V2 Pros
The Beardscape V2 has a lot going for it, especially if you like controlling your grooming routine instead of relying on one fixed setting.
- Excellent length control through the adjustable blade and reversible guards.
- Ceramic blade designed for low friction and reduced heat.
- Five motor-speed settings from 5,000 to 7,000 RPM.
- Very strong battery life, with up to four hours listed under suitable conditions.
- Useful digital display for battery, RPM, and blade information.
- Travel lock makes the V2 more practical for luggage.
- Improved grip compared with the V1.
- Versatile design for beard, stubble, hair, and selected body-grooming jobs.
- Optional blades let you expand what the trimmer can do.
- Charging dock and USB-C charging add flexibility.
Brio Beardscape V2 Cons
No trimmer is perfect. The Beardscape V2’s weaknesses become more obvious if you have a very specific grooming style.
- The standard blade is not a zero-gap blade, so it is not the best choice for ultra-close outlines out of the box.
- It is not waterproof, so you cannot treat it like a shower trimmer.
- The guards can feel bulky for detailed shaping.
- The trimmer is not especially lightweight, at about 8.1 ounces according to published specifications.
- Optional blades add to the ownership cost if you want very close trimming or specialized body grooming.
- The premium feature set may be excessive for someone who only wants a basic beard trim.
If you want a premium beard trimmer with detailed length control, the Beardscape V2 deserves a place on your shortlist. Before buying, check the current package contents and price because Brio offers different bundles and blade options.
Brio Beardscape V2 vs V1
The V1 and V2 are much closer than the names might suggest.
If you already own the original Beardscape, the upgrade question is more complicated.
Both models share the core Beardscape concept. Brio lists the same 2,200 mAh battery, five motor-speed settings, ceramic blade system, reversible guards, and 1.0 to 1.9 mm micro-adjustment.
The V2’s main upgrades are the improved side grip, travel lock, and updated digital display.
So who should buy which?
If you already own a working V1, the V2 is not an essential upgrade.
You will get a nicer experience, especially when traveling, but the fundamental trimming system is very similar.
If you are buying your first Beardscape and the price difference is reasonable, the V2 makes more sense because you get the newer design and extra features.
If the V1 is heavily discounted, however, it can be the better value.
Brio Beardscape V1 Pros and Cons
The original Beardscape still has a lot of the technology that made the line interesting.
Its biggest advantage is that you can get much of the core experience without necessarily needing the newer design.
Pros
- Same basic ceramic blade system as the V2.
- Five motor-speed settings.
- 2,200 mAh battery.
- Adjustable blade clearance.
- Reversible guards.
- Long battery runtime.
Cons
- Older grip design.
- Older digital display.
- No V2 travel lock.
- Less compelling when the price is close to the V2.
Brio Beardscape V2 Zero Blade
The Zero Blade is the accessory to consider if the standard Beardscape V2 does not cut close enough.
It changes the trimmer from a general beard tool into a more close-cutting option.
Brio describes the Zero Blade as a 0.2 mm blade intended for close trimming and tighter lines.
That can make a noticeable difference around the neckline, cheek line, and very short stubble.
The trade-off is simple.
You pay extra for the blade.
So if you rarely trim below 1 mm, there may be little reason to buy it.
If you regularly want a very short finish, however, the Zero Blade makes the Beardscape platform more flexible.
Brio Beardscape V2 Zero Blade Pros and Cons
The Zero Blade solves the standard blade’s biggest limitation.
It also makes the overall ownership cost higher.
Pros
- Much closer cutting than the standard blade.
- Better suited to sharp lines and very short stubble.
- Expands the V2’s usefulness.
- Useful for neckline and cheek-line detailing.
Cons
- Additional purchase.
- Closer cutting can be less forgiving on sensitive skin.
- Not necessary for men who prefer 1 mm or longer stubble.
Brio Beardscape V2 Worth Buying
The answer depends on how you groom.
A premium trimmer only makes sense when its extra features solve problems you actually have.
The Beardscape V2 is worth buying if you trim your beard regularly and care about repeatable length, blending, comfort, battery life, and control.
It is especially appealing if you have a beard that changes length or style.
Maybe you keep short stubble during the week but grow it out on weekends. Maybe you blend your beard into your haircut. Maybe you want one tool that can also handle some body grooming.
The V2 fits those situations well.
It is less convincing if your needs are simple.
If all you do is run a trimmer over your face at the same short setting twice a week, you may not need five motor speeds and a detailed LCD screen.
You also need to think about the blade.
If your priority is an extremely close neckline, crisp cheek lines, or near-shaved stubble, the standard blade may leave you wanting more. The optional Zero Blade changes that equation, but it adds cost. Brio describes its Zero Blade as a 0.2 mm blade intended for very close cuts and tighter lines.
Who Should Buy the Brio Beardscape V2?
You should consider it if you have a medium or long beard, like short stubble with precise length changes, regularly blend your beard, want long battery life, or prefer dry grooming.
It is also a good fit for people who enjoy having control over their tools.
The V2 is like having a camera with manual controls. A simple camera can take a good picture. A more adjustable camera gives you more ways to get the exact result you want.
That is essentially the Beardscape V2’s appeal.
Who Should Skip the Brio Beardscape V2?
Skip it if you need a waterproof shower trimmer, want a very lightweight device, or only need one simple length.
You should also think twice if you want a professional clipper primarily for cutting head hair. The Beardscape can handle hair trimming, but that does not make it a full replacement for every dedicated clipper.
And if your main goal is a razor-close finish, budget for the appropriate close-cutting attachment rather than assuming the standard ceramic blade will deliver it.
Brio Beardscape V2 Maintenance and Ownership
Good maintenance is what keeps a premium trimmer feeling premium.
The Beardscape V2 does not require complicated care, but you should not treat it like a disposable gadget.
Brio recommends brushing hair from the trimmer rather than washing it with water. The company also recommends occasional blade oiling, with one or two drops roughly once a month.
That is easy enough.
After trimming, remove loose hair from the blade and guards. Keep the blade clean. Add a small amount of oil when needed.
Do not flood the blade with oil. More is not better.
Battery care matters too. Brio advises waiting until roughly 20 to 30 minutes of trimming time remain before doing a full charge.
The V2 is also backed by a two-year warranty according to Brio’s support information.
Long-term value depends on how well you maintain the blade and battery, and whether you need to purchase optional blades or replacement accessories.
Brio Beardscape V2 Related Guide
The right beard length is just as important as the trimmer itself.
A small change in stubble length can make your beard look fuller, softer, or sharper.
For more practical advice on finding the right stubble length, see Brio’s guide to dialing in your stubble look.
Brio Beardscape V2 Conclusion
The Beardscape V2 is not trying to be the simplest trimmer on the shelf.
Its strength is control.
- Best feature: Adjustable ceramic blade.
- Best advantage: Long battery life.
- Best use: Beards, stubble, blending, and home grooming.
- Biggest weakness: Not waterproof.
- Biggest limitation: Standard blade is not ultra-close.
- Best upgrade: Add the Zero Blade if you need tighter lines.
- Best buyer: Someone who values precise, repeatable grooming.
Brio Beardscape V2 Is Best for Control and Versatility
The Brio Beardscape V2 is a well-equipped premium beard trimmer that gets the important things mostly right.
Its combination of ceramic cutting, adjustable blade clearance, variable motor speed, long battery life, useful display, and improved grip makes it more versatile than a basic beard trimmer.
Its weaknesses are easy to understand too.
The standard blade does not give you a skin-close zero-gap result. The guards can feel bulky. And the trimmer is not waterproof.
Those are real limitations, not deal-breakers for everyone.
If you want a simple trimmer for one short beard length, you can spend less and still get the job done.
But if you like to change your beard length, blend your beard, maintain stubble, manage a longer beard, or use one device for several grooming tasks, the V2 makes much more sense.
My overall take: The Brio Beardscape V2 is best for the man who wants control rather than just cutting power. If that sounds like you, it is a strong premium beard trimmer worth considering.
Frequently Asked Questions
Is the Brio Beardscape V2 worth buying?
Yes, if you want precise beard length control, long battery life, adjustable motor speeds, and a ceramic blade. It is less appealing if you only need one simple trimming length or want a waterproof trimmer for shower use.
How close does the Brio Beardscape V2 trim?
The standard ceramic blade adjusts from about 1.0 to 1.9 mm. It is not designed for an ultra-close zero-gap finish. Brio offers a separate Zero Blade that cuts much closer at approximately 0.2 mm.
How long does the Brio Beardscape V2 battery last?
Brio lists up to four hours of runtime. Actual battery life depends on the motor-speed setting and how you use the trimmer. Lower speeds generally provide longer runtime than running the motor at maximum speed.
Is the Brio Beardscape V2 good for thick beards?
Yes. Its five motor-speed settings reach up to 7,000 RPM, giving you more control when working through dense or coarse beard hair. For extremely heavy bulk cutting, however, a dedicated professional clipper may still be more suitable.
Can you use the Brio Beardscape V2 for fades?
Yes. The adjustable blade and reversible guards make it useful for beard fades and blending. You can make small changes in cutting length to create a smoother transition between short and longer beard areas.
Is the Brio Beardscape V2 waterproof?
No. The Beardscape V2 is not waterproof and should not be used as a shower trimmer. Brio recommends brushing hair from the device during cleaning instead of washing the trimmer under running water.
